Qpit Type 8 Catchpit

Qpit Type 8 Catchpit is a prefabricated 600mm catchpit, used for highways applications. It is an easily maintainable and cost effective way of protecting downstream drainage systems by separating out silts and debris. The catchpit is 1.5m high, including a 300mm sump. There are three inlet/outlet option sizes available in 150mm, 225mm and 300mm. The catchpits are supplied with pre-installed water tight end caps on each inlet/outlet.

 

Applications

 

Qpit Type 8 Catchpit are designed for use in highways applications and is used in conjunction with Ridgidrain pipework. They minimise the volume of silt and debris conveyed through the drainage system, by encouraging settlement within the sump, reducing maintenance activities. A coupler will be required to join the spigots of the catchpit to the pipeline.

 

Key Benefits

 

  • High quality off–site fabricated catchpits, eliminates wastage associated with in-situ construction
  • One-piece catchpit reduces installation time and minimises Health and Safety risks
  • Watertight structured wall catchpits which are strong but light in weight
  • Separates silt and debris from the downstream drainage system
  • Provides easy access for maintenance activities
  • Inlets and outlets supplied with integral spigots allowing quick and seamless connection to pipeline
  • All inlet/outlet spigots are supplied with water tight end caps

 

Technical Support

 

Detailed guidance and assistance is available. For further information, please contact our Technical Team on +44 (0)1509 615 100 or email: civils@polypipe.com or visit www.polypipe.com/civils-technical-hub




Literature & Technical info